Internet Protocol version 6 IPv6 adds increased address space and improves Internet functionality using a simplified header format, support for authentication and privacy, autoconfiguration of address assignments, and enables new quality-of-service capabilities. This section focuses on Internet Protocol Version 6, the new standard for the Internet and wireless devices. It explains the transition from IPv4 to IPv6, and the effect of IPv6, for a System Administrator.
To ensure that IPv6 works effectively on this version of the C5 operating system, you must configure it as follows:
host%
rsh target sysctl
-w net.inet6.ip6.accept_rtadv=1 |
host% rsh target
/sbin/rtsolifeth-0 |
This is necessary to ensure that IPv6 accepts global addresses in addition to link-local addresses. For more information, see Section 13.26, “rtsol and rtsold”.
These are the advantages of IPv6:
Expanded routing and addressing capabilities.
IPv6 increases the IP address size from 32 bits to 128 bits to support more levels of addressing hierarchy, provide a much greater number of addressable nodes, and employ simpler auto-configuration of addresses.
The addition of a scope field improves the scalability of multicast routing to multicast addresses
A new type of address, called an anycast address, is defined. It identifies sets of nodes, where a packet sent to an anycast address is delivered to one of the nodes. The use of anycast addresses in the IPv6 source route allows nodes to control the path over which their traffic flows.
Header format simplification.
Some IPv4 header fields have been dropped or made optional. This reduces the common-case processing cost of packet handling and keeps the bandwidth cost of the IPv6 header as low as possible, despite the increased size of the addresses. Even though the IPv6 addresses are four times longer than the IPv4 addresses, the IPv6 header is only twice the size of the IPv4 header.
Improved support for options.
Changes in the way IP header options are encoded allow for more efficient forwarding, less stringent limits on the length of options, and greater flexibility for introducing new options in the future.
Quality-of-service capabilities.
A new capability is added to enable the labeling of packets belonging to particular traffic flows for which the sender requests special handling, such as non-default quality of service or real-time service.
Authentication and privacy capabilities.
IPv6 includes the definition of extensions that provide support for authentication, data integrity, and confidentiality.
![[Note]](images/note.png) | Note |
|---|---|
The IPSEC feature and IPv6 routing facilities are not supported in this version of the C5 operating system. Some include files or utilities related to routing and security may however be present in binary and source product. This version of the C5 operating system can be used as an end IPv6 host only. You must have an IPv6 router on your network to answer router solicitations and to send router messages. | |